Logged in: Logged in as: Log in
Search:
This page can't be edited.

AMC-MKX2

    Table of contents
    You are currently comparing two old versions - only when you are comparing against the latest version can you revert. Return to version archive.

    Combined revision comparison

    Comparing version 15:04, 28 Sep 2018 by jsousa with version 15:48, 28 Sep 2018 by jsousa.

    ...

    ...

    • Mid-Fullsize, single width AMC for mTCA and AdvancedTCA
    • Xilinx® Kintex™-7 FPGA family (XC7K325T-2FBG676I2FFG676I)
    • 2048 + 512 Mbytes DDR3 SDRAM Supports AMC.1 PCI Express Gen1, Gen2
    • High-pin-count VITA 57.1 FMC expansion for I/Os

    ...

    The AMC-MKX2 module is a midMKX1 module is a full-size AMC card suitable for use in mATCA and AdvancedTCA platforms, designed to meet the processing needs of high-performance applications in demanding nuclear fusion data acquisition applications and compliant to the ATCA-PTSW-AMC4 AMC carrier. The AMC-MKX2MKX1 is based on the Trenz Kintex FPGA module (TE0741Mercury KX1 FPGA module (M-KX1) which provides large processing power on the inboard Xilinx® Kintex™-7 FPGA (XC7K325T). The TE0741M-KX1 module is accommodated in the AMC card through two Samtec 100 pin connectors and one 60-pin connector. AMC-KX2module through two 168-pin Hirose FX10 connectors. AMC-KX1 is intended for high-performance, high-bandwidth, and low-latency processing applications.

    ...

    FPGA
    • Xilinx Kintex-7T FPGA XC7K325T-2FBG676I® Kintex™-7 FPGA- XC7K325T-2FFG676I

    Memory

     
    • 32 Default 2 GB, 32-bit DDR3 SDRAM 256 MB, 8-bit DDR3 SDRAM – for Microblaze FPGA applications Up to 64 MBytes Quad SPI Flash

    AMC

    Connectivity

     
    • TCLK A/B/C/D clock support for AMC R2.0 through onboard clock switch
    • Fabric clock — RX or TX (100 MHz PCIe, default)
    • AMC.1 PCI Express: x4 PCIe Gen2One  ´4 PCIe Gen2  link  on ports 4-7;
    • User LVDS I/Os (ports 17–20)

    Front Panel
    • Board Mounted LEDs
    • FMC slot

    I/O expansion capabilities

     
    • High-pin-count VITA 57. FMC sit
      • 78 differential user defined pairs: 34 LA pair; 24 HA pair;  HB pairs
      • 2 differential clocks
      • 8 MGTs

    Mechanical
    • Full-size, Single width AMC
    • AMC B+ edge connector

    IPMI

    Controller

     
    • Voltage monitor
    • Geographical address monitor
    • Temperatures monitors
    • Power/Reset controller
    • UART

    Standards

    Compliance

     
    • AdvancedTCA base 3.0 (PICMG 3.0/3.4)
    • AdvancedMC R2.0 (PICMG AMC.0/AMC.1)
    • Support for AdvancedMC R1.0 also available
    • MTCA.0μTCA R1.0
    • VITA 57.1 FMC HPC
    • Hot-plug
    • IPMI

    Electrical

     
    • AMC 12 V mains source
    • 3.3V IPMI

    Testing and development interfaces
    • FPGA JTAG
    • IPMI JTAG, mini-B USB serial port
    • Test points
    • Jumpers
    • LEDs

    FMC Module Option

    IST Solution

    FMC-AD-1Gx

    • 2 channels @ 1.6 GHz 12-bit; or 1 channel @ 3.2 GHz 12-bit
    • AC/DC coupling and Single-Ended/Differential Input

     

    FMC-AD4X-500M-14b

    • 4 channels @ 500 MSPS, 14-bit (AD9864)
    • AC/DC coupling and Single-Ended/Differential Input

    ...

    Version from 15:04, 28 Sep 2018

    This revision modified by jsousa (Ban)

    ...

    ...

    • Fullsize, single width AMC for mTCA and AdvancedTCA
    • Xilinx® Kintex™-7 FPGA family (XC7K325T-2FFG676I)
    • 2048 + 512 Mbytes DDR3 SDRAM
    • Supports AMC.1 PCI Express Gen1, Gen2
    • High-pin-count VITA 57.1 FMC expansion for I/Os

    ...

    The AMC-MKX1 module is a full-size AMC card suitable for use in mATCA and AdvancedTCA platforms, designed to meet the processing needs of high-performance applications in demanding nuclear fusion data acquisition applications and compliant to the ATCA-PTSW-AMC4 AMC carrier. The AMC-MKX1 is based on the Mercury KX1 FPGA module (M-KX1) which provides large processing power on the inboard Xilinx® Kintex™-7 FPGA (XC7K325T). The M-KX1 module is accommodated in the AMC module through two 168-pin Hirose FX10 connectors. AMC-KX1 is intended for high-performance, high-bandwidth, and low-latency processing applications.

    ...

    FPGA
    • Xilinx® Kintex™-7 FPGA- XC7K325T-2FFG676I

    Memory

     
    • Default 2 GB, 32-bit DDR3 SDRAM
    • 256 MB, 8-bit DDR3 SDRAM – for Microblaze FPGA applications
    • Up to 64 MBytes Quad SPI Flash

    AMC

    Connectivity

     
    • TCLK A/B/C/D clock support for AMC R2.0 through onboard clock switch
    • Fabric clock — RX or TX (100 MHz PCIe, default)
    • AMC.1 PCI Express: One  ´4 PCIe Gen2  link on ports 4-7;
    • User LVDS I/Os (ports 17–20)

    Front Panel
    • Board Mounted LEDs
    • FMC slot

    I/O expansion capabilities

     
    • High-pin-count VITA 57. FMC sit
      • 78 differential user defined pairs: 34 LA pair; 24 HA pair;  HB pairs
      • 2 differential clocks

    Mechanical
    • Full-size, Single width AMC
    • AMC B+ edge connector

    IPMI

    Controller

     
    • Voltage monitor
    • Geographical address monitor
    • Temperatures monitors
    • Power/Reset controller
    • UART

    Standards

    Compliance

     
    • AdvancedTCA base 3.0 (PICMG 3.0/3.4)
    • AdvancedMC R2.0 (PICMG AMC.0/AMC.1)
    • Support for AdvancedMC R1.0 also available
    • μTCA R1.0
    • VITA 57.1 FMC HPC
    • Hot-plug
    • IPMI

    Electrical

     
    • AMC 12 V mains source
    • 3.3V IPMI

    Testing and development interfaces
    • FPGA JTAG
    • IPMI JTAG, mini-B USB serial port
    • Test points
    • Jumpers
    • LEDs

    FMC Module Option

    IST Solution

    FMC-AD-1Gx

    • 2 channels @ 1.6 GHz 12-bit; or 1 channel @ 3.2 GHz 12-bit
    • AC/DC coupling and Single-Ended/Differential Input

    ...

    Version as of 15:48, 28 Sep 2018

    This revision modified by jsousa (Ban)

    ...

    ...

    • Mid-size, single width AMC for mTCA and AdvancedTCA
    • Xilinx® Kintex™-7 FPGA family (XC7K325T-2FBG676I)
    • Supports AMC.1 PCI Express Gen1, Gen2
    • High-pin-count VITA 57.1 FMC expansion for I/Os

    ...

    The AMC-MKX2 module is a mid-size AMC card suitable for use in mATCA and AdvancedTCA platforms, designed to meet the processing needs of high-performance applications in demanding nuclear fusion data acquisition applications and compliant to the ATCA-PTSW-AMC4 AMC carrier. The AMC-MKX2 is based on the Trenz Kintex FPGA module (TE0741) which provides large processing power on the inboard Xilinx® Kintex™-7 FPGA (XC7K325T). The TE0741 module is accommodated in the AMC card through two Samtec 100 pin connectors and one 60-pin connector. AMC-KX2 is intended for high-performance, high-bandwidth, and low-latency processing applications.

    ...

    FPGA
    • Xilinx Kintex-7T FPGA XC7K325T-2FBG676I

    Memory

     
    • 32 MBytes Quad SPI Flash

    AMC

    Connectivity

     
    • TCLK A/B/C/D clock support for AMC R2.0 through onboard clock switch
    • Fabric clock — RX or TX (100 MHz PCIe, default)
    • AMC.1 PCI Express: x4 PCIe Gen2 on ports 4-7
    • User LVDS I/Os (ports 17–20)

    Front Panel
    • Board Mounted LEDs
    • FMC slot

    I/O expansion capabilities

     
    • High-pin-count VITA 57. FMC sit
      • 78 differential user defined pairs: 34 LA pair; 24 HA pair;  HB pairs
      • 2 differential clocks
      • 8 MGTs

    Mechanical
    • Full-size, Single width AMC
    • AMC B+ edge connector

    IPMI

    Controller

     
    • Voltage monitor
    • Geographical address monitor
    • Temperatures monitors
    • Power/Reset controller
    • UART

    Standards

    Compliance

     
    • AdvancedTCA base 3.0 (PICMG 3.0/3.4)
    • AdvancedMC R2.0 (PICMG AMC.0/AMC.1)
    • Support for AdvancedMC R1.0 also available
    • MTCA.0
    • VITA 57.1 FMC HPC
    • Hot-plug
    • IPMI

    Electrical

     
    • AMC 12 V mains source
    • 3.3V IPMI

    Testing and development interfaces
    • FPGA JTAG
    • IPMI JTAG, mini-B USB serial port
    • Test points
    • Jumpers
    • LEDs

    FMC Module Option

    IST Solution

    FMC-AD-1Gx

    • 2 channels @ 1.6 GHz 12-bit; or 1 channel @ 3.2 GHz 12-bit
    • AC/DC coupling and Single-Ended/Differential Input

     

    FMC-AD4X-500M-14b

    • 4 channels @ 500 MSPS, 14-bit (AD9864)
    • AC/DC coupling and Single-Ended/Differential Input

    ...

    Powered by MindTouch Core